| display resolution | 320 x 240 pixels QVGA | |
|---|
| backlight lifespan | 50000 hours with 65000 colours | |
|---|
| brightness | 16 levels via touch panel | |
|---|
| view angle horiz x vert | 60° left60° right40° top60° bottom | |
|---|
| character font | Chinese (simplified Chinese)Japanese (ANK, Kanji)ASCIIKoreanTaiwanese (traditional Chinese) | |
|---|
| supply | External source | |
|---|
| [Us] rated supply voltage | 24 V (20.4…28.8 V)DC | |
|---|
| immunity to microbreaks | 10 ms | |
|---|
| inrush current | 30 A | |
|---|
| power consumption in W | 24 W | |
|---|
| local signalling | No indicator | |
|---|
| number of pages | Limited by internal memory capacity | |
|---|
| software designation | SoMachine | |
|---|
| operating system | Magelis | |
|---|
| processor name | CPU RISC | |
|---|
| processor frequency | 333 MHz | |
|---|
| memory description | Flash NAND, 128 MBInternal data storage FRAM, 128 kBApplication run DRAM, 128 MB | |
|---|
| integrated connection type | 1 serial link - RJ45 - RS232/RS485 (rate: <= 115.2 kbits/s)1 Ethernet TCP/IP - RJ451 USB 2.0 type mini B1 USB 2.0 type A CANopen master bus - SUB-D 9 | |
|---|
| realtime clock | Built-in | |
|---|
| downloadable protocols | ModbusModbus TCP/IPCANopen | |
|---|
| fixing mode | By 1 nut - diameter: Ø 22 mm, mounting on: 1...6 mm thick panel | |
|---|
| enclosure material | PC/PBT and PAA | |
|---|
| shock resistance | 147 m/s² for 11 ms (on DIN rail) conforming to IEC 60068-2-27294 m/s² for 6 ms (on panel mounting) conforming to IEC 60068-2-27 | |
|---|
| vibration resistance | +/- 3.5 mm (f = 5…9 Hz) conforming to IEC 60068-2-61 gn (f = 9…150 Hz) conforming to IEC 60068-2-6 | |
|---|
| electromagnetic compatibility | Electrostatic discharge immunity test - test level: 8 kV (air discharge) conforming to IEC 61000-4-2Electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to IEC 61000-4-2Susceptibility to electromagnetic fields - test level: 10 V/m (80 MHz...3 GHz) conforming to IEC 61000-4-3Electrical fast transient/burst immunity test - test level: 2 kV (power lines) conforming to IEC 61000-4-4Electrical fast transient/burst immunity test - test level: 1 kV (between analogue I/O and operating voltage) conforming to IEC 61000-4-4Electrical fast transient/burst immunity test - test level: 2 kV (relay wires) conforming to IEC 61000-4-4Electrical fast transient/burst immunity test - test level: 1 kV (Ethernet line) conforming to IEC 61000-4-4Electrical fast transient/burst immunity test - test level: 1 kV (COM line) conforming to IEC 61000-4-4Electrical fast transient/burst immunity test - test level: 1 kV (CAN line) conforming to IEC 61000-4-4Surge immunity test - test level: 2 kV (power supply (common mode)) conforming to IEC 61000-4-5Surge immunity test - test level: 1 kV (power supply (differential mode)) conforming to IEC 61000-4-5Surge immunity test - test level: 1 kV common mode (digital I/O) conforming to IEC 61000-4-5Surge immunity test - test level: 0.5 kV differential mode (digital I/O) conforming to IEC 61000-4-5Conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to IEC 61000-4-6Conducted emission - test level: 150 kHz...30 MHz conforming to EN 55011Radiated emission - test level: 30 MHz...1 GHz conforming to EN 55011 | |
|---|
| discrete input number | 2 for fast input (normal mode) conforming to IEC 61131-2 Type 16 for digital input conforming to IEC 61131-2 Type 1 | |
|---|
| discrete input voltage | 24 V DC, discrete input logic: sink or source (positive/negative) | |
|---|
| number of common point | 1 for fast input (HSC mode)1 for digital input | |
|---|
| discrete input current | 7.83 mA for fast input5 mA for digital | |
|---|
| input impedance | 4.7 kOhm2.81 kOhm | |
|---|
| sensor power supply | 15…28.8 V DC >= 15 V, current (state 1): >= 5 mA <= 5 V, current (state 0): <= 1.5 mA15…28.8 V DC >= 15 V, current (state 1): >= 2.5 mA <= 5 V, current (state 0): <= 1 mA | |
|---|
| configurable filtering time | 0 ms no filter (none)0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2))3...12 ms integrator (none/run/stop) | |
|---|
| maximum input frequency | 100 kHz for fast input (encoder mode) - control type A/B100 kHz for fast input - control type single phase100 kHz for fast input - control type pulse/direction | |
|---|
| maximum cable distance between devices | Shielded cable: <10 m for fast inputShielded cable: <100 m for digital inputUnshielded cable: <50 m for digital input | |
|---|
| connection pitch | 3.5 mm | |
|---|
| overvoltage protection | With overvoltage protection | |
|---|
| isolation between channels and internal logic | 500 V DC | |
|---|
| isolation between channels | None | |
|---|
| discrete output number | 2 fast output (normal mode), output logic: source6 digital output, output logic: source | |
|---|
| discrete output voltage | 24 V DC (voltage limit: 19.2...28.8 V) with transistor discrete output(s)24 V DC (voltage limit: 5...30 V) with relay discrete output(s)220 V AC (voltage limit: 100...250 V) with relay discrete output(s) | |
|---|
| input/output number | 2 for fast input, terminal(s): FI0...FI12 for fast output, terminal(s): FQ0...FQ16 for digital input, terminal(s): DI0...DI56 for digital output, terminal(s): DQ0...DQ5 | |
|---|
| discrete output current | 2 A 4 A), response time 5 ms with opening contact for digital output2 A 4 A), response time 2 ms with closing contact for digital output300 mA, response time 2 ms for fast output (normal mode)50 mA, response time 2 ms for fast output (PWM or PTO mode) | |
|---|
| insulation resistance | > 10 MOhm between the I/O and internal logic> 10 MOhm between power supply and earth | |
|---|
| maximum output frequency | 100 kHz for fast output (PTO mode)1 kHz for fast output (PWM mode) | |
|---|
| absolute accuracy error | +/- 0.1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)+/- 5 % of full scale cyclic ratio 10...90% for fast output (PWM or PTO mode)+/- 10 % of full scale cyclic ratio 20...80% for fast output (PWM or PTO mode)+/- 15 % of full scale cyclic ratio 30...70% for fast output (PWM or PTO mode) | |
|---|
| analogue input number | 2 for analog input2 for RTDs | |
|---|
| analogue input range | 0...20 mA/4...20 mA - resolution: 12 bits, input impedance: 250 Ohm (tolerance: +/- 1 %)-10...+10 V or 0...10 V - resolution: 12 bits + sign, input impedance: >= 1 MOhm | |
|---|
| analogue input type | RTD at - 200...600 °C - resolution: 16 bits temperature probe: Pt 100/Pt 1000RTD at - 50...200 °C - resolution: 16 bits temperature probe: Ni 100/Ni 1000RTD at - 200...760 °C - resolution: 16 bits (thermocouple J)RTD at - 240...1370 °C - resolution: 16 bits (thermocouple K)RTD at 0...1600 °C - resolution: 16 bits (thermocouple R)RTD at 200...1800 °C - resolution: 16 bits (thermocouple B)RTD at 0...1600 °C - resolution: 16 bits (thermocouple S)RTD at - 200...400 °C - resolution: 16 bits (thermocouple T)RTD at - 200...900 °C - resolution: 16 bits (thermocouple E)RTD at - 200...1300 °C - resolution: 16 bits (thermocouple N) | |
|---|
| analogue output number | 2 resistive load for 12 bits + sign | |
|---|
| analogue output range | 0...20 mA/4...20 mA (> 300 Ohm) for open-circuit-10...10 V/0...10 V (> 2 kOhm) for short-circuit | |
|---|
| height | 129.4 mm | |
|---|
| width | 163 mm | |
|---|
| depth | 76.22 mm | |
|---|
| net weight | 0.803 kg | |
|---|