Acti9 Smartlink SI B - Modbus TCP / IP ja traadita sidemoodul

Acti 9

Acti 9 Smartlink

Smart communication module

Smartlink SI B Ethernet

Basic energy metering E
Improved load monitoring E, U, I, P, Pf
Load alarming
Load control
Breaker status monitoring

Up to 7 wired devices
Up to 20 wireless devices

1 group of 7 digital channels
1 group of 1 analog channel

1.5 A

24 V DC +/- 20 %

Analog input
Digital input and output
Pulse output meter
Wireless energy sensor

Ethernet Modbus TCP/IP server
Web server

BMS controller compatible
Embedded web page

Radio frequency 2.4…2.4835 GHz PowerTag 20

Web page

Pulse converter
Pulse totalising counter

Short-circuit protection for analog input
Against reverse polarity for auxiliary supply
Against reverse polarity for input
Overvoltage at 33 V DC for digital output

10 ms

Factory reset on front face

2 inputs per analog channel
2 inputs + 1 output per digital channel

Current for analog input, 4...20 mA
Voltage for analog input, 0...10 V DC
Current sink for digital input, 24 V DC +/- 20 % at 2.5 mA

0.005 A for digital input

+/- 1 % of full scale for analog input 12 bits

2 ms for digital input from state 0 to state 1
2 ms for analog input from state 0 to state 1

Logic current source: 24 V - DC - 100 mA

<1 V at state 1 digital output

0.5 A for digital output
3 A for power supply

Communication: 1 LED (yellow)
NS (Network Status): 1 LED (green, orange and red)
Communication (LK/ACT 10/100): 1 LED (green and yellow)
Status: 1 LED (green, orange and red)

Horizontal and vertical on DIN rail

White (RAL 9003)

Front

Spring-loaded terminal Ti24 qty: 7 for digital input/output, ordered separately
RJ45 connector qty: 1 for ETHERNET, ordered separately
Plug-in connector qty: 1 for supply circuit
Plug-in connector qty: 1 for communication bus
Plug-in connector qty: 1 for analog input

2 x 0.25 mm² for twisted shielded pairs cable, flexible with cable end for communication bus
2 x 0.25 mm² for twisted shielded pairs cable, flexible without cable end for communication bus
2 x 0.25 mm² for twisted shielded pairs cable, rigid with cable end for communication bus
2 x 0.25 mm² for twisted shielded pairs cable, rigid without cable end for communication bus
2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, rigid with cable end for analog input
2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, rigid without cable end for analog input
2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, flexible with cable end for analog input
2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, flexible without cable end for analog input
1 x 0.5...1 x 1.5 mm², flexible with cable end for control
1 x 0.5...1 x 1.5 mm², flexible without cable end for control
1 x 0.5...1 x 1.5 mm², rigid with cable end for control
1 x 0.5...1 x 1.5 mm², rigid without cable end for control
2 x 0.2...2 x 1.5 mm², flexible with cable end for supply circuit
2 x 0.2...2 x 1.5 mm², flexible without cable end for supply circuit
2 x 0.2...2 x 1.5 mm², rigid with cable end for supply circuit
2 x 0.2...2 x 1.5 mm², rigid without cable end for supply circuit

Control: 10 mm
Supply circuit: 7 mm
Analog input: 7 mm
Communication bus: 7 mm

RS485 Modbus RTU master SUB-D 9 9.6...19.2 kbauds
Ethernet Modbus TCP/IP server RJ45 10/100 Mbit/s

0 useful

22.5 mm

359 mm

42 mm

180 g

Set of 1 connector
Set of 1 bus connector
Set of 1 power supply connector
Set of 2 locking clips

iTL auxiliary
C60
Linergy FM
iOF+SD 24
iACT24
iATL24
pulse output meter
Modbus meter
PowerTag wireless energy sensor
RCA iC60
Acti 9 iCT auxiliary
Acti 9 iC60
Acti 9 iID
Acti 9 iSW-NA
Acti 9 iDPN Vigi
Acti 9 C40
Acti 9 DT40
Acti 9 DT60
Acti 9 I-NA
Acti 9 ITG40
Acti 9 iDPN
Acti 9 Reflex iC60 Ti24 connector

ECOREACH
Web page

Acti 9 Smartlink IP

IP20

3

Resistance to electrostatic discharge (air discharge), 8 kV, conforming to IEC 61000-4-2
Resistance to electrostatic discharge (contact discharge), 4 kV, conforming to IEC 61000-4-2
Resistance to radiated electromagnetic fields (80 MHz...3 GHz), 10 V/m, conforming to IEC 61000-4-3
Power supply: resistance to fast transient (5...100 kHz), 2 kV, conforming to IEC 61000-4-4
Input/output: resistance to fast transient, 1 kV, conforming to IEC 61000-4-4
Communication bus: resistance to fast transient, 1 kV, conforming to IEC 61000-4-4
Conducted EMC (0.15...80 MHz), 10 V, conforming to IEC 61000-4-6
Immunity to magnetic fields at network frequency, 30 A/m, conforming to IEC 61000-4-8
Radiated emission (30...1000 MHz), class A, conforming to IEC 61131-3 Ed.3
Conducted emission (0.15...30 MHz), class A, conforming to IEC 61131-2

Corrosive 3C2 conforming to IEC 60721-3-3
Salt mist 2 conforming to IEC 60068-2-52

1 gn, amplitude = 3.5 mm (f = 5…300 Hz)10 cycles conforming to IEC 60068-2-6

15 gn for 11 ms conforming to IEC 60068-2-27

Other parts: 650 °C ( 30 s ) conforming to IEC 60695-2-10
On connection terminals: 960 °C ( 30 s ) conforming to IEC 60695-2-10

2

93 % at 40 °C

0...2000 m

-25…60 °C

-40…80 °C

Green Premium product

Compliant
EU RoHS Declaration

Yes

China RoHS declaration
Product out of China RoHS scope. Substance declaration for your information

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins