discrete I/O number | 24 | |
---|
maximum number of I/O expansion module | 7 for transistor output7 for relay output | |
---|
supply voltage limits | 85…264 V | |
---|
network frequency | 50/60 Hz | |
---|
inrush current | 40 A | |
---|
maximum power consumption in VA | 58 VA at 100...240 V with max number of I/O expansion module35 VA at 100...240 V without I/O expansion module | |
---|
power supply output current | 0.52 A 5 V for expansion bus0.16 A 24 V for expansion bus | |
---|
discrete input logic | Sink or source (positive/negative) | |
---|
discrete input voltage | 24 V | |
---|
discrete input voltage type | DC | |
---|
analogue input resolution | 10 bits | |
---|
LSB value | 10 mV | |
---|
conversion time | 1 ms per channel + 1 controller cycle time for analogue input analog input | |
---|
permitted overload on inputs | +/- 30 V DC for 5 min (maximum) for analog input+/- 13 V DC (permanent) for analog input | |
---|
voltage state 1 guaranteed | >= 15 V for input | |
---|
voltage state 0 guaranteed | <= 5 V for input | |
---|
discrete input current | 7 mA for discrete input5 mA for fast input | |
---|
input impedance | 3.4 kOhm for discrete input100 kOhm for analog input4.9 kOhm for fast input | |
---|
response time | 35 µs turn-off, I2...I5 terminal(s) for input10 ms turn-on for output10 ms turn-off for output5 µs turn-on, I0, I1, I6, I7 terminal(s) for fast input35 µs turn-on, other terminals terminal(s) for input5 µs turn-off, I0, I1, I6, I7 terminal(s) for fast input100 µs turn-off, other terminals terminal(s) for input | |
---|
configurable filtering time | 0 ms for input3 ms for input12 ms for input | |
---|
output voltage limits | 125 V DC277 V AC | |
---|
maximum current per output common | 4 A at COM 27 A at COM 07 A at COM 1 | |
---|
absolute accuracy error | +/- 1 % of full scale for analog input | |
---|
electrical durability | 100000 cycles AC-12, 120 V, 240 VA, resistive100000 cycles AC-12, 240 V, 480 VA, resistive300000 cycles AC-12, 120 V, 80 VA, resistive300000 cycles AC-12, 240 V, 160 VA, resistive100000 cycles AC-15, cos phi = 0.35, 120 V, 60 VA, inductive100000 cycles AC-15, cos phi = 0.35, 240 V, 120 VA, inductive300000 cycles AC-15, cos phi = 0.35, 120 V, 18 VA, inductive300000 cycles AC-15, cos phi = 0.35, 240 V, 36 VA, inductive100000 cycles AC-14, cos phi = 0.7, 120 V, 120 VA, inductive100000 cycles AC-14, cos phi = 0.7, 240 V, 240 VA, inductive300000 cycles AC-14, cos phi = 0.7, 120 V, 36 VA, inductive300000 cycles AC-14, cos phi = 0.7, 240 V, 72 VA, inductive100000 cycles DC-12, 24 V, 48 W, resistive300000 cycles DC-12, 24 V, 16 W, resistive100000 cycles DC-13, 24 V, 24 W, inductive (L/R = 7 ms)300000 cycles DC-13, 24 V, 7.2 W, inductive (L/R = 7 ms) | |
---|
switching frequency | 20 switching operations/minute with maximum load | |
---|
mechanical durability | 20000000 cycles for relay output | |
---|
minimum load | 1 mA at 5 V DC for relay output | |
---|
protection type | Without protection at 5 A | |
---|
reset time | 1 s | |
---|
memory capacity | 256 kB for user application and data RAM with 10000 instructions256 kB for internal variables RAM | |
---|
data backed up | 256 kB built-in flash memory for backup of application and data | |
---|
data storage equipment | 2 GB SD card (optional) | |
---|
battery type | BR2032 lithium non-rechargeable, battery life: 4 year(s) | |
---|
backup time | 1 year at 25 °C (by interruption of power supply) | |
---|
execution time for 1 KInstruction | 0.3 ms for event and periodic task | |
---|
execution time per instruction | 0.2 µs Boolean | |
---|
exct time for event task | 60 µs response time | |
---|
maximum size of object areas | 255 %TM timers512 %M memory bits8000 %MW memory words255 %C counters512 %KW constant words | |
---|
realtime clock | With | |
---|
clock drift | <= 30 s/month at 25 °C | |
---|
regulation loop | Adjustable PID regulator up to 14 simultaneous loops | |
---|
counting input number | 4 fast input (HSC mode) at 100 kHz 32 bits | |
---|
counter function | A/BSingle phasePulse/direction | |
---|
integrated connection type | USB port with mini B USB 2.0 connectorNon isolated serial link serial 1 with RJ45 connector and RS232/RS485 interface Ethernet with RJ45 connector | |
---|
supply | (serial)serial link supply: 5 V, <200 mA | |
---|
transmission rate | 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS4851.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232480 Mbit/s for USB | |
---|
communication port protocol | USB port: USB - SoMachine-NetworkNon isolated serial link: Modbus master/slave - RTU/ASCII or SoMachine-NetworkEthernet | |
---|
port Ethernet | 10BASE-T/100BASE-TX 1 port with 100 m copper cable | |
---|
communication service | Modbus TCP serverModbus TCP slave deviceDHCP clientModbus TCP clientEthernet/IP adapter | |
---|
local signalling | 1 LED (green)PWR: 1 LED (green)RUN: 1 LED (red)module error (ERR): 1 LED (green)SD card access (SD): 1 LED (red)BAT: 1 LED per channel (green)I/O state: 1 LED (green)SL: Ethernet network activity (green)ACT: Ethernet network link (yellow)Link (Link Status): | |
---|
electrical connection | removable screw terminal block for inputs removable screw terminal block for outputs terminal block, 3 terminal(s) for connecting the 24 V DC power supply connector, 4 terminal(s) for analogue inputsMini B USB 2.0 connector for a programming terminal | |
---|
maximum cable distance between devices | Shielded cable: <10 m for fast inputUnshielded cable: <30 m for outputUnshielded cable: <30 m for digital inputUnshielded cable: <1 m for analog input | |
---|
insulation | Between input and internal logic at 500 V ACNon-insulated between analogue input and internal logicNon-insulated between analogue inputsBetween supply and ground at 1500 V ACBetween sensor power supply and ground at 500 V ACBetween input and ground at 500 V ACBetween output and ground at 1500 V ACBetween supply and internal logic at 2300 V ACBetween sensor power supply and internal logic at 500 V ACBetween output and internal logic at 2300 V ACBetween Ethernet terminal and internal logic at 500 V ACBetween supply and sensor power supply at 2300 V AC | |
---|
marking | CE | |
---|
sensor power supply | 24 V DC at 250 mA supplied by the controller | |
---|
mounting support | Top hat type TH35-15 rail conforming to IEC 60715Top hat type TH35-7.5 rail conforming to IEC 60715 plate or panel with fixing kit | |
---|
height | 90 mm | |
---|
depth | 70 mm | |
---|
width | 110 mm | |
---|
net weight | 0.395 kg | |
---|