servo motor BMH - 1.4 Nm - 8000 rpm - untapped shaft - without brake - IP54 - Mootorid - Tööstusautomaatika

Details

Main
product or component type	Servo motor
device short name	BMH
maximum mechanical speed	8000 rpm
continuous stall torque	1.4 N.m for LXM32.U90M2 at 3 A, 230 V, single phase 1.4 N.m for LXM32.D18M2 at 6 A, 115 V, single phase
peak stall torque	4 N.m for LXM32.U90M2 at 3 A, 230 V, single phase 4.2 N.m for LXM32.D18M2 at 6 A, 115 V, single phase
nominal output power	450 W for LXM32.U90M2 at 3 A, 230 V, single phase 350 W for LXM32.D18M2 at 6 A, 115 V, single phase
nominal torque	1.1 N.m for LXM32.U90M2 at 3 A, 230 V, single phase 1.35 N.m for LXM32.D18M2 at 6 A, 115 V, single phase
nominal speed	4000 rpm for LXM32.U90M2 at 3 A, 230 V, single phase 2500 rpm for LXM32.D18M2 at 6 A, 115 V, single phase
product compatibility	LXM32.D18M2 at 115 V single phase LXM32.U90M2 at 230 V single phase
shaft end	Smooth shaft
IP degree of protection	IP54 standard
speed feedback resolution	131072 points/turn x 4096 turns
holding brake	Without
mounting support	International standard flange
electrical connection	Straight connectors

Complementary
range compatibility	Lexium 32
[Us] rated supply voltage	240 V
network number of phases	Three phase
continuous stall current	2.85 A
continuous power	1.05 W
maximum current Irms	9.6 A for LXM32.D18M2 9.6 A for LXM32.U90M2
maximum permanent current	9.56 A
second shaft	Without second shaft end
shaft diameter	11 mm
shaft length	23 mm
feedback type	Multiturn SinCos Hiperface
motor flange size	70 mm
number of motor stacks	1
torque constant	0.49 N.m/A at 120 °C
back emf constant	31.17 V/krpm at 120 °C
number of motor poles	10
rotor inertia	0.59 kg.cm²
stator resistance	3.2 Ohm at 20 °C
stator inductance	9.1 mH at 20 °C
stator electrical time constant	2.8 ms at 20 °C
maximum radial force Fr	660 N at 1000 rpm 520 N at 2000 rpm 460 N at 3000 rpm 410 N at 4000 rpm 380 N at 5000 rpm 360 N at 6000 rpm
maximum axial force Fa	0.2 x Fr
type of cooling	Natural convection
length	122 mm
centring collar diameter	60 mm
centring collar depth	2.5 mm
number of mounting holes	4
mounting holes diameter	5.5 mm
circle diameter of the mounting holes	82 mm
net weight	1.6 kg

Offer Sustainability
Sustainable offer status	Green Premium product
REACh Regulation	REACh Declaration
EU RoHS Directive	Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration
Mercury free	Yes
RoHS exemption information	Yes
China RoHS Regulation	China RoHS declaration
Environmental Disclosure	Product Environmental Profile
WEEE	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Contractual warranty
Warranty	18 months