-
Elektrikaubad
- Tööstusautomaatika
- Kilbitarvikud
- Releed
- Klemmid
- Kontaktorid
- Mootorikaitse & juhtimine
- Kaitselülitid ja lahklülitid
- Liigpingepiirikud
- Pistikupesad
- Rikkevoolukaitsed
- Jaotusklemmide plokid
- Jaotuslatid
- Lati kated
- Nutikilpide seadmed
- Kombilülitid CB+RVK
- Sulavkaitsmed
- Kaablikanalid
- Hämaralülitid ja sensorid
- Sisseviigud & Läbiviigud
- Termostaadid
- Sojendid
- Kilbi jahutussüsteemid
- Kilbi LED-lambid
- DIN-liistud
- Dimmerid
- Teised Tarvikud
- Toiteallikad ja Mõõteseadmed
- Installatsioonitarvikud
- Juhtimine ja alarm
- Kilbid
- Teised kaubad
- Teenused
- Kontaktid
Details
Characteristics
| range of product | Altivar Machine ATV320 | |
|---|---|---|
| product or component type | Variable speed drive | |
| product specific application | Complex machines | |
| device short name | ATV320 | |
| format of the control block | Enclosed | |
| product destination | Synchronous motorsAsynchronous motors | |
| EMC filter | Class C2 EMC filter integrated | |
| IP degree of protection | IP66 conforming to IEC 61800-5-1IP66 conforming to IEC 60529 | |
| degree of protection | UL type 4X conforming to UL 61800-5-1 (with conformity kit) | |
| type of cooling | Fanless | |
| network number of phases | 3 phases | |
| [Us] rated supply voltage | 380...500 V - 15...10 % | |
| supply frequency | 50...60 Hz - 5...5 % | |
| motor power kW | 2.2 kW for heavy duty | |
| motor power hp | 3.0 hp for heavy duty | |
| line current | 8.7 A at 380 V (heavy duty)6.6 A at 500 V (heavy duty) | |
| prospective line Isc | 5 kA | |
| apparent power | 5.7 kVA at 500 V (heavy duty) | |
| continuous output current | 5.5 A at 4 kHz for heavy duty | |
| maximum transient current | 8.3 A during 60 s (heavy duty) | |
| power range | 2.2...3 kW at 380…500 V, 3 phases (based on load duty) | |
| asynchronous motor control profile | Voltage/frequency ratio, 5 pointsFlux vector control without sensor, standardVoltage/frequency ratio - Energy Saving, quadratic U/fFlux vector control without sensor - Energy SavingVoltage/frequency ratio, 2 points | |
| synchronous motor control profile | Vector control without sensor | |
| speed drive output frequency | 0.1…599 Hz | |
| nominal switching frequency | 4 kHz | |
| switching frequency | 2...16 kHz adjustable4...16 kHz with derating factor | |
| safety function | STO (safe torque off) SIL 3SLS (safe limited speed)SS1 (safe stop 1)SMS (safe maximum speed)GDL (guard door locking) | |
| communication port protocol | Modbus serialCANopen | |
| optional communication modules | Communication module, CANopen daisy chain RJ45Communication module, CANopen SUB-D 9Communication module, CANopen open style terminal blockCommunication module, EtherCAT RJ45Communication module, DeviceNetCommunication module, Ethernet/IPCommunication module, Profibus DP V1Communication module, ProfinetCommunication module, Ethernet Powerlink |
| variant | Standard version | |
|---|---|---|
| output voltage | <= power supply voltage | |
| permissible temporary current boost | 1.5 x In during 60 s (heavy duty) | |
| speed range | 1…100 for asynchronous motor in open-loop mode | |
| speed accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn | |
| torque accuracy | +/- 15 % | |
| transient overtorque | 170…200 % of nominal motor torque | |
| braking torque | <= 170 % during 60 s with braking resistor | |
| regulation loop | Adjustable PID regulator | |
| motor slip compensation | Automatic whatever the loadAdjustable 0...300 %Not available in voltage/frequency ratio (2 or 5 points) | |
| acceleration and deceleration ramps | LinearUSCUSRamp switchingAcceleration/deceleration ramp adaptationAcceleration/deceleration automatic stop with DC injection | |
| braking to standstill | By DC injection | |
| protection type | Input phase breaks: driveOvercurrent between output phases and earth: driveOverheating protection: driveShort-circuit between motor phases: driveThermal protection: drive | |
| frequency resolution | Display unit: 0.1 HzAnalog input: 0.012/50 Hz | |
| electrical connection | Screw terminal, clamping capacity: 1.5...2.5 mm², AWG 14...AWG 10 (power supply)Screw terminal, clamping capacity: 1.5...2.5 mm², AWG 14...AWG 10 (DC bus)Screw terminal, clamping capacity: 1.5...2.5 mm², AWG 14...AWG 10 (motor/braking resistor)Screw terminal, clamping capacity: 1.5...2.5 mm², AWG 20...AWG 16 (control) | |
| connector type | 1 RJ45 (on terminal) for Modbus/CANopen | |
| physical interface | 2-wire RS 485 for Modbus serial/CANopen | |
| transmission frame | RTU for Modbus serial | |
| transmission rate | 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen | |
| data format | 8 bits, configurable odd, even or no parity for Modbus serial | |
| type of polarization | No impedance for Modbus serial | |
| number of addresses | 1…127 for CANopen1…247 for Modbus serial | |
| method of access | Slave CANopen | |
| supply | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection | |
| local signalling | 1 LED (green)CANopen run: 1 LED (red)CANopen error: 1 LED (red)drive fault: | |
| width | 250.0 mm | |
| height | 340.0 mm | |
| depth | 235.0 mm | |
| net weight | 7.7 kg | |
| analogue input number | 3 | |
| analogue input type | AI1 voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 10 bitsAI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bitsAI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits | |
| discrete input number | 7 | |
| discrete input type | Programmable (sink/source) (DI1...DI4)24...30 V DC, with level 1 PLCProgrammable as pulse input 20 kpps (DI5)24...30 V DC, with level 1 PLCSwitch-configurable PTC probe (DI6)24...30 V DCSafe torque off (STO)24...30 V DC - 1500 Ohm | |
| discrete input logic | Negative logic (sink) (DI1...DI6), > 19 V (state 0), < 13 V (state 1)Positive logic (source) (DI1...DI6), < 5 V (state 0), > 11 V (state 1) | |
| analogue output number | 1 | |
| analogue output type | AQ1 software-configurable current: 0...20 mA, impedance: 800 Ohm, resolution 10 bitsAQ1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 10 bits | |
| sampling duration | 2 ms (AI1, AI2, AI3) - analog input2 ms (AQ1) - analog output | |
| accuracy | +/- 0.2 % AI1, AI2, AI3 for a temperature of -10...60 °C analog input+/- 0.5 % AI1, AI2, AI3 for a temperature of 25 °C analog input+/- 1 % AQ1 for a temperature of 25 °C analog output+/- 2 % AQ1 for a temperature of -10...60 °C analog output | |
| linearity error | AI1, AI2, AI3: +/- 0.2...0.5 % of maximum value for analog inputAQ1: +/- 0.3 % for analog output | |
| discrete output number | 3 | |
| discrete output type | Configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cyclesConfigurable relay logic: (R2A, R2B) NO - 100000 cyclesLogic: (LO) | |
| refresh time | Logic input (DI1...DI6): 8 ms (+/- 0.7 ms)Relay output (R1A, R1B, R1C): 2 msRelay output (R2A, R2C): 2 ms | |
| minimum switching current | Relay output R1, R2: 5 mA at 24 V DC | |
| maximum switching current | Relay output R1 on resistive load, cos phi = 1: 3 A at 250 V ACRelay output R1 on resistive load, cos phi = 1: 4 A at 30 V DCRelay output R1, R2 on inductive load, cos phi = 0.4: 2 A at 250 V ACRelay output R1, R2 on inductive load, cos phi = 0.4: 2 A at 30 V DCRelay output R2 on resistive load, cos phi = 1: 5 A at 250 V ACRelay output R2 on resistive load, cos phi = 1: 5 A at 30 V DC | |
| specific application | Machinery | |
| Variable speed drive application selection | Self erecting HoistingCarousel Material handlingConveyor Material handlingLifting platfrom Material handlingPalletizers - medium performance Material handlingTransfer table Material handlingTurn table Material handlingCutting - medium accuracy Material working (wood, ceramic, stone, pvc, metal)Drilling Material working (wood, ceramic, stone, pvc, metal)Saw Material working (wood, ceramic, stone, pvc, metal)Bagging PackagingFeed conveyor low performance PackagingFilling bottles - intermittent operation PackagingLinear labeling PackagingOther application PackagingStretching wrapping PackagingTray take PackagingKnitting TextilePrinting machines TextileSpinning TextileCar Washing machinesOther application Washing machinesStandard crane - travelling or trolley Hoisting | |
| Motor power range | 2.2…3 kW at 380…500 V 3 phases | |
| motor starter type | Variable speed drive |
| isolation | Between power and control terminals | |
|---|---|---|
| insulation resistance | > 1 MOhm 500 V DC for 1 minute to earth | |
| noise level | 0.0 dB conforming to 86/188/EEC | |
| power dissipation in W | Self-cooled: 74.0 W at 380 V, switching frequency 4 kHz | |
| operating position | Vertical +/- 10 degree | |
| electromagnetic compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-41.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 | |
| pollution degree | 3 conforming to EN/IEC 61800-5-1 | |
| vibration resistance | 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-61.5 mm peak to peak (f= 2…13 Hz) conforming to EN/IEC 60068-2-6 | |
| shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 | |
| relative humidity | 5…95 % without condensation conforming to IEC 60068-2-35…95 % without dripping water conforming to IEC 60068-2-3 | |
| ambient air temperature for operation | -10…40 °C without40…60 °C with derating factor | |
| ambient air temperature for storage | -25…70 °C | |
| operating altitude | <= 1000 m without1000...3000 m with current derating 1 % per 100 m | |
| environmental characteristic | Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3Dust pollution resistance class 3S2 conforming to EN/IEC 60721-3-3 | |
| standards | EN/IEC 61800-3Environment 1 category C2 EN/IEC 61800-3Environment 2 category C3 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 60721-3 IEC 61508 IEC 13849-1 UL 508C UL 61800-5-1 CSA C22.2 No 274 | |
| product certifications | CEATEXNOMGOSTEACRCMKCREACH | |
| marking | CEATEXULCSAEACRCM |
| REACh Regulation | ||
|---|---|---|
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration | |
| Mercury free | Yes | |
| RoHS exemption information | ||
| China RoHS Regulation | ||
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
- Be the first to review this product
Write Your Own Review
Kontaktid
-
Aadress
Kadaka tee 50-10b, 12915 Tallinn, Estonia -
Telefoni number
+3725089251 -
E-Post
info@elektrikaubad.ee
© Winvol OÜ, 2020. Kõik õigused kaitstudreg. nr: 12750864, VAT: EE101810186
Tööaeg
Mon - Fri / 9:00AM - 6:00PM
Mon - Fri / 9:00AM - 6:00PM
