| discrete input number | 4 | |
|---|
| discrete input voltage | 24 V | |
|---|
| discrete input voltage type | DC | |
|---|
| input voltage limits | 20.4...28.8 V | |
|---|
| discrete input logic | Sink | |
|---|
| discrete input current | 3.3 mA | |
|---|
| voltage state 0 guaranteed | <= 5 V | |
|---|
| voltage state 1 guaranteed | >= 15 V | |
|---|
| input filtering | <= 2 µs hardware1 ms by default<= 25 ms configurable by software | |
|---|
| analogue input number | 1 | |
|---|
| analogue input type | Voltage, input range: +/- 10 VCurrent, input range: 0...20 mA/4...20 mA | |
|---|
| analogue input resolution | 12 bits + sign for voltage12 bits for current | |
|---|
| common mode rejection | 70 dB DC for analog input70 dB 50 Hz for analog input | |
|---|
| discrete output number | 2 | |
|---|
| discrete output type | Transistor | |
|---|
| output voltage | 24 V DC | |
|---|
| output voltage limits | 20.4...28.8 V | |
|---|
| discrete output logic | Source | |
|---|
| discrete output current | <= 0.5 A per output<= 1 A | |
|---|
| peak output current | 14 A | |
|---|
| maximum leakage current | 5 µA (when switched off) for digital output | |
|---|
| switching frequency | 100 Hz, resistive for digital output | |
|---|
| analogue output number | 1 | |
|---|
| analogue output type | Voltage: +/- 10 VCurrent: 0...20 mA | |
|---|
| conversion time | 300 µs for analog output | |
|---|
| analogue output resolution | 12 bits + sign, +/- 10 V12 bits, 0...20 mA | |
|---|
| measurement resolution | 2.441 mV, +/- 10 V, +/- 10 V4.883 µA, 0...20 mA/4...20 mA, 0...20 mA | |
|---|
| colour | White | |
|---|
| response time | <= 250 µs from state 0 to state 1 for digital output<= 250 µs from state 1 to state 0 for digital output1 ms for analog output | |
|---|
| input impedance | 7.18 kOhm digital>= 1 MOhm analog, +/- 10 V | |
|---|
| minimum output impedance | 1 kOhm +/- 10 V 0…55 °C10 kOhm +/- 10 V 55…60 °C | |
|---|
| load impedance ohmic | <= 400 Ohm (output: 0...20 mA) at 0…55 °C<= 300 Ohm (output: 0...20 mA) at 55…60 °C<= 300 Ohm (input: 0...20 mA/4...20 mA) | |
|---|
| sampling duration | 300 µs for analog input | |
|---|
| measurement error | < 0.08 % of full scale (input: +/- 10 V) at 25 °C< 0.08 % of full scale (input: 0...20 mA/4...20 mA) at 25 °C< 0.15 % of full scale (output: +/- 10 V) at 25 °C< 0.15 % of full scale (output: 0...20 mA) at 25 °C | |
|---|
| temperature coefficient | +/- 0.009 %FS/°C (input: 0...20 mA/4...20 mA) +/-0.006 %FS/°C (input: +/- 10 V) +/- 0.02 %FS/°C (output: 0...20 mA) +/- 0.02 %FS/°C (output: +/- 10 V) | |
|---|
| non-linearity | +/- 0.02 %FS (input: 0...20 mA/4...20 mA) +/- 0.02 %FS (input: +/- 10 V) +/- 0.1 %FS (output: 0...20 mA) +/- 0.1 %FS (output: +/- 10 V) | |
|---|
| type of cable | Shielded cable | |
|---|
| isolation | No insulation between channels500 Vrms AC insulation between channel and bus | |
|---|
| supply | Internal | |
|---|
| [Us] rated supply voltage | 24 V DC -15...20 % | |
|---|
| local signalling | 1 LED (green)power supply (ON): 1 LED (red)power supply (OFF): 4 LEDs (green)digital input status: 2 LEDs (orange)digital output status: 1 LED (orange)1 LED (green) | |
|---|
| wiring mode | 1 wire for digital input/output | |
|---|
| current consumption | 2 mA at 5 V DC bus73 mA at 24 V DC inputs/outputs | |
|---|
| maximum power dissipation in W | 1.75 W | |
|---|
| protection type | Against reverse polarity for digital outputAgainst short-circuits for digital outputThermal overload protection for digital outputAgainst short-circuits for analog output | |
|---|
| marking | CE | |
|---|
| net weight | 0.025 kg | |
|---|