motion control stepper motor drive - SD326 - pulse/direction

Details

Complementary
format of the drive	Block
network number of phases	Single phase
[Us] rated supply voltage	100...120 V - 15...10 % 200...230 V - 15...10 %
supply voltage type	AC/DC
network frequency limits	50…60 Hz (- 15...10 %)
communication interface	Pulse/direction, integrated
maximum motor phase current	2.5 A
nominal power	180 W at 115 V 270 W at 230 V
short-circuit current	0.5 kA
associated fuse rating	6 A at 115 V 6 A at 230 V
overvoltage category	III
inrush current	60 A
maximum leakage current	30 mA IEC 60990-3
voltage state 0 guaranteed	<= 5 V for 24 V optocoupler input signals <= 0.5 V for 5 V optocoupler input signals
voltage state 1 guaranteed	15...30 V for 24 V optocoupler input signals 2.5...5.25 V for 5 V optocoupler input signals
input current	25 mA for 5 V optocoupler input signals 7 mA for 24 V optocoupler input signals
maximum input frequency	200 kHz for 24 V optocoupler input signals 200 kHz for 5 V optocoupler input signals
maximum switching voltage	30 V DC (readiness signal output)
maximum switching current	200 mA (readiness signal output)
maximum voltage drop	<1 V 50 mA load for readiness signal output
type of cooling	Natural convection
maximum mechanical speed	3000 rpm
height	145 mm
width	72 mm
depth	140 mm
shock resistance	15 gn for 11 ms conforming to EN/IEC 60068-2-27
net weight	1.1 kg

Environment
electromagnetic compatibility	Electrostatic discharge level 3 conforming to EN/IEC 61000-4-2 Immunity to electrical transients level 4 conforming to EN/IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to EN/IEC 61000-4-3 Voltage/current impulse level 3 conforming to EN/IEC 61000-4-5
standards	EN/IEC 50178 EN/IEC 61800-3 environment 1 EN/IEC 61800-3 environment 2 EN/IEC 61800-3 EN/IEC 61800-5-1
product certifications	UL CUL
marking	CE
ambient air temperature for operation	0…40 °C conforming to UL 0…50 °C
ambient air temperature for storage	-25…70 °C
pollution degree	Level 2
relative humidity	5…85 % without condensation
operating altitude	<= 1000 m without > 1000...< 2000 m without (maximum ambient temperature 40°C, no protective film, lateral distance of > 50mm)
vibration resistance	1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
IP degree of protection	IP20 On upper part: IP40 (without removal of protective film)

Offer Sustainability
Sustainable offer status	Green Premium product
REACh Regulation	REACh Declaration
EU RoHS Directive	Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration
Mercury free	Yes
RoHS exemption information	Yes
China RoHS Regulation	China RoHS declaration
Environmental Disclosure	Product Environmental Profile
Circularity Profile	End of Life Information

Contractual warranty
Warranty	18 months